What To Do If - Electrolux FM4360G-AN User Manual

What to do if ...

Ring burners are not igniting.
The ring burners go out on
large flame setting, even after
several attempts to light.
If you are unable to remedy the problem by following the above sugges-
tions, please contact your dealer or the Customer Care Department.
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
If the appliance has been wrongly operated, the visit from the customer service
technician or dealer may not take place free of charge, even during the warranty
period.
Problem
The switch was not depressed
firmly enough.
The spark plug is damp or
dirty.
Fault in the electrical supply.
The fuse in the house's electri-
cal wiring (fuse box) has been
tripped.
The ignition is defective.
Dirt on the thermosensor
Defect on the thermosensor
Possible cause
What to do if ...
Remedy
Depress switch firmly as far as
it will go.
Dry or clean spark plug, if
necessary light with gas
lighter or match.
Check the fuses. If the fuse
should trip several times, a
dvise Customer Care Depart-
ment.
Advise Customer Care Depart-
ment.
Clean thermosensor. If this
does not lead to success,
advise Customer Care Depart-
ment
Advise Customer Care Depart-
ment.
13