Technical Information; Maintenance; General Troubleshooting - Chauvet NIMBUS User Manual

5. T
ECHNICAL

Maintenance

General Troubleshooting

Symptom
Circuit breaker keeps
blowing
Product does not power
up
Nimbus™ User Manual (Rev. 07)
I
NFORMATION
The Nimbus requires minimal upkeep in order to maintain optimum performance.
However, some steps are needed in order to clean and maintain the product for
maximum usage. The recommended procedure is as follows:
1. After usage, wait for the machine to fully cool down.
2. Dump all water from the internal tank from the product.
3. If there is any water left over, wait until it has cooled down before transporting. You
may risk bodily harm and damage to transport items if the water is still hot.
Possible Cause
 Excessive load on the circuit
 Short circuit along the power lines
 No energy on power outlet
 Loose or damaged power cord
 Internal problem
If you still experience problems after trying the above solutions, contact
CHAUVET® Technical Support.
Possible Action
 Make sure that the total load does not
exceed 80% of the breaker or fuse
nominal current
 Check the power lines and power cords
 Check power outlet
 Change to another outlet
 Check the power cord
 Send product for repair
Page 9 of 11