Operation And Testing; Setting The Security Code - Radio Shack 49-537 Owner's Manual

49-537.fm Page 17 Thursday, August 19, 1999 9:16 AM

OPERATION AND TESTING

SETTING THE SECURITY CODE

When you first connect power to the keypad, and
any time after the keypad loses power, it uses the
preset factory security code (1 2 3 4). Follow these
steps to set your own security code.
Note: If you take longer than 10 seconds to com-
plete Step 2, 3, or 4, the keypad automatically
resets to the old code. Begin again from Step 1.
1. Press Q.
2. Enter the current security code.
3. Press Q again.
4. Enter your desired four-digit personal code.
Notes:
• We suggest that you avoid obvious numbers
such as your street address, birth date, and
so on. Also, it is a good idea to periodically
change your code.
17