Korg iPOLYSIX Owner's Manual page 23

PITCH
BEND RANGE [0.00...12.00 (0...1oct)]
Specifies*the*amount*of*pitch*change*that*will*occur*when*
you*use*the*pitch*bend*wheel.*This*setting*specifies*the*pitch*
change*that*will*occur*when*the*pitch*bend*wheel*is*rotated* *
all*the*way*in*the*positive*(+)*direction.
TRANSPOSE [-12...+12 ]
Adjusts*the*pitch*of*the*oscillator*in*steps*of*one*semitone*
(100*cents).*
Automation
The*values*of*the*switches*and*knobs*can*be*stored*for*each*
step*of*a*pattern.*This*lets*you*automatically*control*those*
parameters*while*the*pattern*plays.
Here's*an*example*of*recording*and*editing*the*movement*
of*a*knob.
Recording knob movements
1.
In the synth screen, tap the REC button and then the
PLAY button to start recording.
2.
Use the desired knob.
You*can*also*use*several*knobs*to*record*them.
3.
Tap the REC button.
Recording*will*end,*and*you'll*switch*to*playback.*The*
volume*will*change*as*the*steps*progress.*The*knobs*will*
also*move*automatically.
Editing the recorded automation
1.
For approximately one second, touch and hold a knob
whose movement you recorded.
The*automation*edit*screen*will*appear.
2.
Drag the bar for each step up or down to edit the value.
3.
To close the edit screen, touch any area of the synth
other than the setting screen.
SYNTH
23