Korg iPOLYSIX Owner's Manual page 18

iPolysix manual
VCO
OCTAVE [32' , 16' , 8' , 4' , 2']
Switches*the*octave.
WAVEFORM
[ (TRI),
Selects*the*oscillator*waveform.
PW/PWM [0.00...10.00]
Adjusts*the*pulse*width*of*the*waveform*when*PW*or*PWM*
is*selected*as*the*"WAVEFORM."
PWM SPEED [0.00...10.00]
Adjusts*the*speed*of*pulse*width*modulation*when*PWM*
is*selected*as*the*"WAVEFORM."
VCO EG INT [-5.00...+5.00]
Adjusts*the*depth*of*the*EG*that*is*applied*to*the*pitch*of*
the*VCO.
SUB OSC [OFF, 1OCT, 2OCT]
Sets*the*octave*of*the*sub-oscillator.
18
(SAW), PW, PWM, (NOISE)]
VCF
CUTOFF [0.00...10.00]
Adjusts*the*cutoff*frequency*of*the*filter.
RESONANCE [0.00...10.00]
Boosts*the*region*near*the*cutoff*frequency.*When*this*knob*
is*at*or*near*the*maximum*setting,*the*filter*will*self-oscillate.
EG INTENSITY [-5.00...+5.00]
Specifies*the*depth*and*direction*to*which*the*EG*will*affect*
the*cutoff*frequency.
KBD TRACK [0.0...150.0]
Adjusts*the*amount*of*depth*that*the*cutoff*frequency*will*
change*according*to*the*pitch*of*the*note*that*is*input.
With*a*setting*of*100,*the*change*in*cutoff*frequency*will*be*
proportionate*to*the*change*in*pitch.
MODE [LPF, HPF]
Specifies*the*type*of*filter*that*is*used.
LPF:*Low-pass*filter
HPF:*High-pass*filter