Configuring Your Computer - ActionTec GT784WN User Manual

Actiontec GT784WN Router
Setup and User Guide
13. Click OK when the message appears.

Configuring Your Computer

Once your router has been configured, you'll need to configure your computer to test and make sure your
Static IP addresses are working correctly.
To configure your computer:
Windows 7 and Windows Vista:
1. Select the Start Circle. Then in the Start Search field, type "ncpa.cpl.".
2. Right click Local Area Connection.
3. Select Properties.
4. Highlight (do not uncheck) Internet Protocol TCP/IP Version 4.
5. Select Properties.
6. Set the computer to Use the Following IP Address.
7. Use the information from your Customer Information Sheet to complete the configuration fields
(IP Address, Subnet Mask, Default Gateway, DNS).
Windows XP:
1. Select Start, then Run.
2. Type "ncpa.cpl" in the Run box.
3. Right-click Local Area Connection, then select Properties.
4. Highlight (do not uncheck) Internet Protocol TCP/IP version 4.
5. Select Properties.
6. Set the computer to Use the following IP Address.
7. Use the information from your Customer Information Sheet to complete the configuration fields
(IP Address, Subnet Mask, LAN Gateway, DNS).
1-888-850-5915
7
Technical Support
128429/7-12/7670