Gigabyte Socket A Processor Motherboard 7VM400AM-RZ User Manual page 27

Enabled Enable USB 2. 0 controller. (Default v alue)
Disabled Disable USB 2. 0 controller.
USB Keyboard Support
Enabled Enable USB key board support.
Disabled Disable USB key board support. (Default v alue)
USB Mouse Support
Enabled Enable USB mouse support.
Disabled Disable USB m ouse support. (Default v alue)
Onboard Serial P ort 1
Auto BIOS w ill autom atically s etup the port 1 address.
3F8/ IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default v alue)
2F8/ IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/ IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/ IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial P ort 2
Auto BIOS w ill autom atically s etup the port 2 address.
3F8/ IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/ IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default v alue)
3E8/ IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/ IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
Onboard Parallel port
This feature allow s y ou to select from a giv en set of parameters if the parallel port uses the onboard
I/O controller.
378/ IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default v alue)
278/ IRQ5 Enable onboard LPT port and address is 278/ IRQ5.
Disabled Disable onboard LPT port.
3BC/ IRQ7 Enable onboard LPT port and address is 3BC/ IRQ7.
Paral lel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default v alue)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Ex tended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
Game Port Address
201 Set Game Port Address to 201. (Default v alue)
209 Set Game Port Address to 209.
Disabled Disable this function.
Midi Port Address
300 Set M idi Port Address to 300.
330 Set M idi Port Address to 330.
Disabled Disable this function. (Default v alue)
Midi Port IRQ
5 Set Midi Port IRQ to 5.
10 Set M idi Port IRQ to 10. (Default v alue)
- 27 - BIOS Setup