Gigabyte Socket A Processor Motherboard 7VM400AM-RZ User Manual page 15

4) FDD (Floppy Connector)
Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the same side with the Pin1.
5) IDE1 / IDE2 (IDE1 / IDE2 Connector)
Please connect first hard disk to IDE1 and connect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the same side with the Pin1.
6) SATA0 / SATA1 (Serial ATA Connector)
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA
and install the proper driver in order to work properly.
34
33
2
1
40
39
IDE1
2
1
Pin No.
1
2
3
1 7
4
5
6
7
- 15 -
IDE2
Definition
GND
TXP
TXN
GND
RXN
RXP
GND
Hardware Installation Process