Advertisement
Connection to the User System
Connect the adapter to the user system.
Plug the user interface connector of the adapter into the adapter interface connector on the user
system.
When plugging the user interface connector, align its index mark (pin No. 1) with the adapter
interface connector's counterpart.
For the specifications of the adapter interface connector, see "Adapter Interface Specifications"
in Section 4 "Specifications".
Figure 5 shows how to connect the adapter to the user system.
4
Adapter interface connector on the user system
Adapter
Figure 5 Connecting to the User System
User interface connector
Index mark (pin No. 1)
User
system
Advertisement
