3.4.6 IPMI
This section allows you to configure the IPMI settings.
IPMI Specification Version / BMC Firmware Version
It displays the version of the IPMI Specification and BMC Firmware. (Read only)
System Event Logging
Select [Enabled] to allow logging of system events.
Options: Enabled / Disabled
Clear System Event Log
When set to [Enabled], system event log will be cleared.
Options: Disabled / Enabled
Existing Event Log number / Remaining Event Log number
It displays the number of existing event logs and remaining event logs. (Read only)
SYS Firmware Progress
It records the continual development of BIOS POST.
Options: Disabled / Enabled
BIOS POST Errors
Enabled -> BIOS will halt & display error message if there is any POST error .
Disabled -> BIOS will not halt if there is any POST error.
Options: Disabled / Enabled
57
http://www.tyan.com