2.6 - Installing the Processor and Cooling Fan
Your S5211/S5211-1U supports the latest processor technologies from Intel. Check
®
the TYAN
website for latest processor support:
Processor Installation (LGA 775 Socket)
The processor should be installed carefully. Make sure you are wearing an antistatic
strap and handle the processor as little as possible.
Follow these instructions to install your processor and heat sink.
1.
Locate the processor socket on the motherboard and lift the locking lever to a
fully open position.
locking
lever
2.
Lift the load plate to a fully open position.
load
plate
3.
Insert the processor into the socket and make sure that pin 1 is correctly
located.
http://www.tyan.com
24
http://www.tyan.com
Pin 1
identifier