TYAN Toledo i3210W Manual page 54

3.4.4 DMI Event Logging
This section allows you to fine tune the DMI Event Logging configuration.
Event Log Capacity
It reports the space available in the DMI event log. If set to [Full], the event log has
no more available space to store DMI events. (read only)
Event Log Validity
It reports the validity of the DMI event log. (read only)
View DMI Event Log
It allows you to view the contents of the DMI event log. (read only)
Event Logging
Select [Enabled] to allow logging of DMI events.
Options: Enabled / Disabled
Mark DMI Events as Read
Press [Enter] to mark DMI events as read.
Clear all DMI Event logs
When set to [Enabled], BIOS event log will be cleared.
Options: Disabled / Enabled
54
http://www.tyan.com