TYAN Toledo i3210W Manual page 46

ECC Delivery
When an ECC error occurs, it generates an interrupt. Select the type of interrupt to
report: [NMI Non-maskable], [SMI System Management], [SCI System Control].
Options: SMI / NMI / SCI / None
Default Primary Video Adapter
This feature is used to select the priority of initialing VGA card (PCI VGA or PCI-E
VGA).
Options: Auto / PCI
Enable Multimedia Timer
It is used to enable/disable Multimedia Timer support.
Options: No / Yes
Serial ATA
This feature is used to enable the SATA function.
Options: Enabled / Disabled
Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.
Options: Auto / Serial ATA
SATA RAID Enable
When this option is enabled, the Silicon Image RAID BIOS is loaded on system start
up, allowing for configuration of hardware RAID arrays. With the SATA RAID ROM
option disabled, the drives attached to the controller can only act independently of
one another.
Options: Enabled / Disabled
SATA AHCI Enable
This item allows you to enable the SATA AHCI functionality.
Options: Disabled / Enabled
SATA AHCI Legacy Enable
[Enabled]: SATA and PATA drives are auto-detected and placed in Legacy Mode.
[Disabled]: SATA and PATA drives are auto-detected and placed in Native IDE
mode.
Options: Disabled / Enabled
46
http://www.tyan.com