Izt Belt - Husqvarna EZ 17 Operator's Manual

IZT belt

To replace IZT (Integrated Zeroturn
Transaxle) belt
Park the mower on a level surface. Engage the
park brake.
IZT belt removal
NOTE: Be careful not to damage the fan
blades on the IZT as this can affect cooling or
damage the IZT
• Remove the deck belt (see to replace
deck belt in this section of the manual).
• Create slack in the belt by either
removing the spring on the pump idler
arm or inserting 1/2 breaker bar into the
square hole on the spring loaded idler.
Rotate arm to release belt tension.
• The belt should now be able to be
removed from the engine pulley and IZT
pulleys.
Belt installation
• Wrap the IZT belt around the IZT pulleys.
• Route the belt around the inside of the
idler pulley.
• Now you can wrap the belt around the
engine pulley.
• Reattach the spring on the pump idler
arm if previously disconnected.
• Reinstall the deck belt onto the electric
clutch pulley (see to replace deck belt in
this section of the manual).
46-
English
MAINTENANCE
1. Spring loaded idler pulley
2. Fixed idler pulley
3. Electric clutch
4. IZT belt
5. Deck belt
5
1. Spring loaded idler pulley
2. Fixed idler pulley
3. Engine
4. IZT belt
5. Left drive pulley
6. Right drive pulley
7. Square hole
IZT belt routing
3
4
1
5
2
3
4
2
1
7
6