IZT Belt
To replace IZT (Integraded Zeroturn Transaxle) belt
Park the mower on a level surface. Engage the park
brake.
IZT belt removal
NOTE: Be careful not to damage the fan blades on the
IZT as this can affect cooling or damage the IZT
•
Remove the deck belt (see to replace deck belt in
this section of the manual).
•
Create slack in the belt by either removing the
spring on the pump idler arm or inserting 1/2"
breaker bar into the square hole on the spring
loaded idler. Rotate arm to release belt tension.
•
The belt should now be able to be removed from
the engine pulley and IZT pulleys.
Belt installation
•
Wrap the IZT belt around the IZT pulleys.
•
Route the belt around the inside of the idler pulley.
•
Now you can wrap the belt around the engine
pulley.
•
Reattach the spring on the pump idler arm if
previously disconnected.
•
Reinstall the deck belt onto the electric clutch
pulley (see to replace deck belt in this section of
the manual).
48
-
English
MAINTENANCE
1. Spring loaded idler pulley
2. Fixed idler pulley
3. Electric clutch
4. IZT belt
5. Deck belt
IZT belt
5
1. Spring loaded idler pulley
2. Fixed idler pulley
3. Engine
4. IZT belt
5. Left drive pulley
6. Right drive pulley
7. Square hole
IZT belt routing
3
4
1
2
5
3
4
1
7
8058-008
2
6
8050-157