Husqvarna EZ 17 Operator's Manual page 30

10. When the engine starts, immediately
release the ignition key back to the run
position.
IMPORTANT INFORMATION
Do not run the starter for more than
10 seconds each time. If the engine does not
start, wait about 60 seconds before
re-trying.
11. Press the choke control in gradually
when the engine has started.
12. Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate
speed, "half throttle", for 3-5 minutes
before loading it too heavily.
USE FULL THROTTLE WHEN
MOWING.
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is a odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.
28-
English
OPERATION
Return to run position
Gradually press in the choke control
Set the engine speed
8011-743
8011-756
8011-763