Yaesu VX-5R Operating Manual page 66

Set Mode
Set Item 17 [ BUSY LED BUSY LED ]
BUSY LED BUSY LED
BUSY LED
Function: Enable/disable the BUSY LED while the Squelch is open.
Available Values: ON/OFF
Default: ON
Set Item 18 [ ARTS BEEP ARTS BEEP ]
ARTS BEEP ARTS BEEP ARTS BEEP
Function: Select the Beep option during ARTS operation.
Available Values: IN RANGE/ALWAYS/OFF
Default: IN RANGE
IN RANGE: Beeps sound only when the radio first detects that you are within range.
ALWAYS: Beeps sound every time a polling transmission is received from the other
station (every 15 or 25 seconds when in range).
OFF: No alert beeps sound.
Set Item 19 [ ARTS ITVL ARTS ITVL ]
ARTS ITVL ARTS ITVL
ARTS ITVL
Function: Select the Polling Interval during ARTS operation.
Available Values: 15 SEC/25 SEC
Default: 25 SEC
This setting determines how often the other station will be polled during ARTS operation.
Set Item 20 [ KEY BEEP KEY BEEP ]
KEY BEEP KEY BEEP
KEY BEEP
Function: Enable/disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
Set Item 21 [ EDGE BEEP EDGE BEEP ]
EDGE BEEP EDGE BEEP EDGE BEEP
Function: Enable/disable the Band-edge beeper while scanning.
Available Values: ON/OFF
Default: OFF
When this feature "ON," a beep will sound when the scanner reaches the band edge (dur-
ing VFO Scanning) or when it reaches Memory channel "1" (during Memory Channel
Scanning).
Set Item 22 [ BELL BELL ]
BELL BELL
BELL
Function: Select the CTCSS Bell ringer repetitions.
Available Values: OFF/1/3/5/8/REPEAT
Default: OFF
64 VX-5R O
PERATING
M
ANUAL