Energy Saving Settings; Speaker Settings; Restore Default Settings - Philips HTS3563 User Manual

Energy saving settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Screen saver]: Switch the home theater
to screen saver mode after 10 minutes
of inactivity.
•
[Auto standby]: Switch the home theater
to standby after 30 minutes of inactivity.
This timer works only when a disc or
USB play is paused or stopped.
• [Sleep timer]: Set the duration of the sleep
timer so that the home theater is switched
to standby after the specified period.

Speaker settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Enhanced audio]: Select [On] to enable
audio post processing at the speaker and
enable karaoke settings (if your product
supports Karaoke). To play the original
audio of the disc, select [Off].
Tip
•
Enable audio post processing before you select a
predefined sound mode (see 'Sound mode' on page
22).

Restore default settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Advanced] > [Restore default
settings], and then press OK.
4
Select [OK], and then press OK to confirm.
» Your home theater is reset to its default
settings except for some settings such
as parental control and DivX VOD
registration code.
EN
25