Picture And Video Settings; Audio Settings; Parental Control Settings; Display Settings - Philips HTS3563 User Manual

Picture and video settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [TV display]: Select a picture format to fit
the TV screen.
•
[HDMI video]: Select the resolution of
video signal that is output from HDMI OUT
(ARC) on your home theater. To enjoy the
selected resolution, make sure that your TV
supports the selected resolution.
•
[HDMI Deep Color]: Recreate the natural
world on your TV screen by displaying
vivid images using billion colors. Your home
theater must be connected to a Deep
Color enabled TV through an HDMI cable.
• [Picture settings]: Select pre defined
color settings for the video display. Select
[User] to create your own setting.
•
[Watch 3D video]: Set HDMI video to
support 3D or 2D video.
• [User]: Select advanced settings for the
video. Available only after you create a
preset called 'User' under picture settings.
Note
•
If you change a setting, make sure that the TV
supports the new setting.

Audio settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Night mode]: For quiet listening,
decrease the volume of loud sounds on
your home theater. Night mode is only
available for Dolby-encoded DVD and
Blu-ray discs.
• [HDMI Audio]: Set the HDMI audio
output from your TV, or disable HDMI
audio output from the TV.
EN
24

Parental control settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Change Password]: Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000.
•
[Parental control]: Restrict access to
discs that are recorded with age ratings.
To play all discs, irrespective of the ratings,
select 8 or [Off].

Display settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
• [Auto subtitle shift]: Enable or disable
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel]: Set the brightness of the
home theater front panel display.
• [VCD PBC]: Enable or disable the content
menu navigation of VCD and SVCD discs
with Play Back Control feature.