Electronic Range Control - Amana ARDS802 Series Owner's Manual

Electronic Range Control

OVEN
CANCEL
TIMER
ON/OFF
Figure 32
Pad
OVEN CANCEL
TIMER ON/OFF
CLOCK
STOP TIME
COOK TIME
CLEAN
BROIL
BAKE
or
Oven Signals
Timer signal
Preheat signal
End-of-Cycle signal
Other Features
12-hour automatic Cancel
Service Codes and Tones
88:88
DELAY
HR
OVEN ON
CLEAN
STOP
TIMER
STOP COOK
CLOCK
TIME
TIME
Description
Cancels any cooking or cleaning function except timer.
Use to time any kitchen function or cancel timer. Does not control bake, broil, or
clean function.
Use to set time of day.
Use to set delayed bake and self-clean.
Use to set timed baking.
Use to select self-clean cycle.
Use to select broil.
Use to select bake.
Use to set temperature or time.
When time elapses, timer beeps 3 times then approximately once every 6-8
seconds.
After setting oven to bake and selecting a temperature, oven preheats. When
oven reaches set temperature, 1-second signal sounds.
When a timed cooking cycle is complete, three long signals sound. End of cycle
signal continues to sound until CLEAR/OFF pad is pushed.
If minute timer end of cycle signal is sounding, push TIMER ON/OFF pad.
This safety feature prevents oven from continuing to operate if it has been left on
for over 12 hours. If a cooking function continues longer than 12 hours without
any options on oven control being touched, this feature turns oven off. Any time
an option is touched, 12-hour automatic cancel is reset.
Electronic range control is equipped with a self diagnostic system. Self diagnostic
system alerts you if there is a error or problem in the control. If electronic range
control sounds a series of short, rapid beeps for over 16 seconds and display
shows a F-code, record the F-code shown. Some F-codes can be cleared by
touching CANCEL or disconnecting power to the range. If the code continues to
reoccur call an authorized servicer. Disconnect electrical supply to range and
contact an authorized servicer.
350°
BAKE BROIL
O
CLEAN LOCK
N
CLEAN BAKE
BROIL
20