Connections; Ac Cord Connection And Xing; Video Equipment Connection - Panasonic TH-42LF30ER Operating Instructions Manual

Connections

AC cord connection and xing

Video equipment connection

SERIAL IN, SERIAL OUT
SERIAL Input/Output
Terminal
Control the Display by
connecting to PC.
(see page 12)
8
AC cord xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
AUDIO IN (COMPOSITE)
Connect the audio output of a device connected
to VIDEO.
(see page 9)
AV IN
HDMI1, HDMI2
HDMI Input Terminal
(see page 9)
AUDIO IN
(COMPONENT / RGB)
Connect the audio output
of a device connected to
COMPONENT/RGB IN.
(see page 9)
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet rst.
DVI-D IN, DVI-D OUT
DVI-D Input/Output
Terminal
(see page 10)
PC IN
PC Input Terminal
(see page 11)
AUDIO IN (DVI-D / PC)
Connect the audio
output of a device
connected to DVI-D IN,
PC IN. (see page 10, 11)
Unplug the AC cord
VIDEO
Composite Video
Input Terminal
(see page 9)
COMPONENT/RGB IN
Component/RGB
Video Input Terminal
(see page 9)