Options Adjustments - Panasonic TH-42LF30ER Operating Instructions Manual

Options Adjustments

1
2
3
4
5
Item
On: Displays all the following on screen.
• Power on display
• Input signal switch display
On screen display
• No signal display
• Mute and the remaining time of off-timer after
Off: Hides all the items above from view.
Adjusts the input signal when the unit is turned on.
Off
* "SLOT INPUT" is displayed when an optional Terminal Board is installed.
Initial input
Notes:
• Only the adjusted signal is displayed. (see page 16)
• This menu is available only when "Input lock" is "Off".
When there is no signal, the speci ed input signal is automatically switched to.
Off
* "SLOT INPUT" is displayed when an optional Terminal Board is installed.
Failover input
Notes:
• When other than "Off" is set, "Input lock" will be grayed out and cannot be set.
• When "Input lock" is set to other than "Off", this setting will be grayed out and cannot be set.
Press
Off
Off: Sets normal volume.
Initial VOL level
On: Sets your preferred volume.
Notes:
• When "Maximum VOL level" is "On", the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options menu
Press
Off
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Maximum VOL level
Notes:
• If the "Maximum VOL level" is set lower than the "Initial VOL level", the "Initial VOL level" automatically
• The volume display can go up to 100 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options menu
42
Press to display the Setup menu.
Press to select "OSD Language".
Press for more than 3 seconds.
Press to select "Options".
Press to display the Options menu.
Press to select your preferred menu.
Press to adjust the menu.
Press to exit from Options menu.
SLOT INPUT* VIDEO
SLOT INPUT* VIDEO
button to adjust the volume when the unit is turned on.
On
if you adjust the volume when "Initial VOL level" is "On" and cursor is on the menu.
button to adjust the maximum volume.
On
becomes the same as the "Maximum VOL level".
if you adjust the volume when "Maximum VOL level" is "On" and cursor is on the menu.
Options
Shipping
Adjustments
was pressed.
Component/RGB PC
Component/RGB PC
Options
On screen display
Initial input
Failover input
Initial VOL level
Off
Maximum VOL level Off
Input lock
Button lock
Remocon User level
Options
Off-timer function
Initial Power Mode
ID select
Remote ID
Serial ID
Serial Daisy Chain
Studio W/B
Options
Slot power
Power ON Screen Delay
Clock Display
Power On Message (No activity power off)
Function button assign 1
Function button assign 2 Screensaver
DVI HDMI1 HDMI2
DVI HDMI1 HDMI2
1/3
On
Off
Off
0
0
Off
Off
Off
2/3
Enable
Normal
0
Off
Off
---
Off
3/3
Off
Off
Off
On
Signal
Off
Off