Important Safety Instructions - Mattel Intellivision Owner's Manual

INTELLIVISION MASTER COMPONENT OWNER'S MANUAL
Master Component power switch not turned on.
Twin lead wire from Switch Box not properly attached to VHF terminals on
television set.
EITHER SIDE OF PLAYFIELD NOT VISIBLE ON SCREEN
Adjust the horizontal hold control on your television set.
PLAYFIELD INDISTINCT, RESEMBLING A WEAK SIGNAL
Television set not properly adjusted. Adjust fine tuning, brightness and
contrast controls.
Loose connections at antenna terminals of television set or Switch Box.
Switch Box Cable not plugged in fully.
PLAYFIELD BLURRED OR WOBBLY OR NO COLOR
Television set not properly fine tuned. Adjust television fine tuning, color or
tint controls.
Broadcasting on Channel 3, 4 or cable TV by an especially strong television
station in your area. Disconnect TV-VHF antenna wires from the Switch
Box. Reconnect to watch regular TV.
NOTE: If Master Component malfunctions after all troubleshooting steps have been taken,
disconnect and determine if television set is functioning properly. If it is, Master Component
may require repair.

Important Safety Instructions

READ INSTRUCTIONS
All safety and operating instructions should be read before operating this
appliance.
HEED THE WARNINGS
All warnings on this appliance and in the operating instructions should be
adhered to.
file:///C|/Documents%20and%20Settings/s/Deskt...ntellivision%20Master%20Component%20Owne1.htm (12 of 14) [9/28/2008 12:13:10 PM]