How To Take Care Of Your Master Component - Mattel Intellivision Owner's Manual

INTELLIVISION MASTER COMPONENT OWNER'S MANUAL

How to Take Care of Your Master Component

The Intellivision Master Component will bring you many years of fun and excitement if you
follow a few simple rules to keep it in good condition. Read the following points carefully.
They will help you get the maximum use from your Master Component.
Do not force the cartridge into the component slot.
Intellivision game cartridges are designed to inhibit hand contact with their electronic
circuitry. However, care should be taken not to get the fingers into the open end of the
cartridge. Static electricity, such as the kind you get from a rug, could damage the
sensitive electronic components in the cartridge.
Turn the Master Component OFF when not in use.
If the Master Component is not to be used for a length of time the Switch Box Cable may
be unplugged and stored behind TV.
Handle the Master Component carefully. Do not drop the cartridges, component or Hand
Controllers.
Do not lift the Master Component or the Hand Controllers by the wires, as serious damage
can result.
Avoid exposing the cartridges, Master Component or Hand Controllers to excessive heat.
Do not set large objects which would block ventilation openings on top of Master
Component housing.
Do not spill liquids onto the cartridges, Master Component or Hand Controllers.
Clean the exterior of your Master Component with a soft, slightly dampened cloth, BUT
ONLY AFTER YOU HAVE TURNED THE POWER SWITCH TO "OFF" AND DISCONNECTED THE
POWER CORD FROM THE 120 VOLT WALL OUTLET.
NOTE: It is normal for the top of Master Component to become warm during operation.
The lower left corner of the Master Component will be slightly warm even when the Master
Component On-Off switch is in the OFF position.
file:///C|/Documents%20and%20Settings/s/Deskt...ntellivision%20Master%20Component%20Owne1.htm (10 of 14) [9/28/2008 12:13:10 PM]