Table of Contents
Advertisement
Using other functions
The following functions can be selected
¢
q:
with
§Menu§
Delete Entry
Delete selected entry.
Call. Home Internal
Pressing this key results in all registered
handsets and the base station being
called.
Use Number
Edit or add to a stored number. Then
dial or use other functions with
Please note:
When a phone number is displayed on the
screen, you can programme this number onto
an unassigned direct dialling key by pressing
and holding the relevant direct dialling key.
Programming SOS mode
Requirement: SOS mode is not activated.
¢
¢
Settings
§Menu§
¢
¢
Keys
I: <no entry>
§OK§
dialling key I selected)
¢
Emergency Call Mode
If SOS mode has already been activated
and is then reactivated, Change no./ name?
appears in the display. Respond to the
request
u
with
to continue the procedure
§Yes§
u
with
to continue with Label with
§No§
Internal Call
~
Enter or edit the number if
required and press
~
Enter or edit the name if
required and press
Further number?
Confirm with
§Yes§
SOS numbers. You can enter up to four
SOS numbers.
Label with Internal Call
Confirm with
§Yes§
call in addition to the stored numbers
when the SOS key is pressed.
Record own name/addr.
Confirm with
§Yes§
(e.g. name and address), which will be
§Menu§
¢
Direct Diall.
§OK§
(Direct
¢
§Menu§
¢
§OK§
.
§OK§
.
§OK§
to enter additional
to initiate an internal
to speak a message
Using the directory, direct dialling keys and lists
announced automatically to the called
user after pressing the SOS key. The
announcement is played back for con-
firmation purposes and can be
changed or deleted.
SOS mode is activated.
Please note:
After the SOS procedure is programmed,
functionality should be tested.
Changing/deleting SOS numbers
.
Requirement: SOS mode is activated.
¢
Settings
§Menu§
Numbers
¢
Entry
Now change or delete the desired entries.
If your telephone is connected to a PABX,
you may have to enter the access code
(external line prefix) as the first digit of
your entry (see the user guide for
your PABX).
Please note:
The emergency call text that the recipient of
your emergency call hears comprises two or
three text parts. The callee first hears text part
1, then part 2 and finally part 3. If you have not
added any personal emergency call text (text
part 2), the emergency call only comprises text
part 1 and text part 3.
– Text part 1 (predefined by default):
"This is an emergency call."
– Text part 2 (personal emergency call text):
You can speak this text yourself (see
page 19). For example, you can state your
name and address here. Example:
"This is John Smith, 8 Park Road, Suffolk
IP25 9AL"
– Text part 3 (predefined by default):
"To accept this call, please press key 5."
Switching on/off SOS mode
¢
Settings
§Menu§
¢
Mode
Having switched on SOS mode, proceed as
described in the Section Programming
SOS mode (page 19).
¢
¢
Emergency
§OK§
¢
¢
Edit Entry/Delete
§Menu§
§OK
¢
¢
Emergency Call
§OK§
(‰ = on)
§OK§
19
Advertisement
Table of Contents
