Installation; Installing Cameras; Setting Up The Wireless Receiver - First Alert DWS-401 User Manual

InStALLInG CAMErAS

1. Select the position for the camera and secure the camera stand.
(Screws and anchors are supplied. Use an appropriate screw type
for the mounting surface.)
2. Screw the camera onto the bracket.

SEttInG uP tHE WIrELESS rECEIVEr

1. Connect the power cable to the DC IN of the receiver.
2. Plug the power supply into the electrical outlet.
VIEW ON TELEVISION OR OTHER MONITOR
1. Connecting to a monitor such as a TV: Connect the AV cable into the AV OUT of the receiver.
2. Connect the two RCA jacks to the TV AV IN. Yellow = Video; White = Audio
3. Press POWER button to turn on the receiver.
4. Once the receiver is connected, see Camera Setup, Pairing (Operating Menus) to link the
camera(s) to the receiver.
CAMERAS & WIRELESS RECEIVER
3. Adjust camera to the proper view angle Make
sure the lens is upright relative to your subject.
Tighten the thumb bolt.
4. Screw the antenna into place on the rear of
the camera. Adjust the antenna to an upright
position.
5. Connect the power cable to the DC IN of the
camera.
6. Plug the power supply into the electrical outlet.
7. Once the camera is connected, see Camera
Setup, Camera Pairing to link the camera(s) to
the receiver.
Camera Orientation
It's important the camera is mounted correctly
to ensure the image is not upside down as the
camera lens can only be positioned one way.
LINK
PWR.

InStALLAtIOn

Audio
Video
Page 9
4
TV