Display Dab Information; Use Dab Menus - Philips DCB3270 User Manual

Display DAB information

Press DISPLAY repeatedly to cycle through the
following information (if available).
• Dynamic label segment (DLS)
• Signal strength
• Program type (PTY)
• Ensemble name
• Frequency
• Signal error rate
• Bitrate codec
• DAB/DAB+
• Time
• Date

Use DAB menus

1
In DAB mode, press MENU to access the
DAB menus.
2
Press /
menus.
Re-scan for stations
Full scan is used to perform a wide range
search for DAB radio stations.
Press OK to start scanning for available DAB
stations.
» After the scanning is complete, the first
detected station is broadcast.
Tune to a station manually
With this feature, you can tune to a specific
channel/frequency manually. In addition to
antenna orientation for better radio reception,
the optimal reception can also be obtained with
this feature.
EN
16
to toggle through the
1
Press OK to access the station list.
2
/
Press
5A to 13F.
3
Press OK to confirm the option.
Remove invalid stations
This option lists active stations and removes any
stations that are in the list but have no service
in your area. In front of the station name of an
invalid station, a question mark (?) is displayed.
1
Press OK to access the sub-menus.
2
/
Press
• : Return to the previous menu.
• : Remove invalid stations from the
station list.
3
Press OK to confirm the option.
System menus
1
Press OK to access system menus.
2
Press /
• For details, refer to the section 'Use
system menus'.
to select a station from
to select an option.
to select a sub-menu.