Table of Contents
Advertisement
5 Product
information
Note
•
Product information is subject to change without prior
notice.
Specifications
Amplifier
Rated Output Power
Signal to Noise Ratio
Aux-in Link
Bluetooth
Standard
Output power
Frequency band
Range
General information
AC Power
Operation Power
Consumption
Standby Power
Consumption
Max. load for iPod/
iPhone/iPad
Dimensions
- Main Unit
(W x H x D)
Weight
- Main Unit
- With Packing
EN
11
2 X 10 W RMS
> 57 dBA
500mV RMS
Bluetooth Standard
Version 2.1+EDR
0 dBm (Class 2)
2.402~2.480 GHzISM
Band
10m (free space)
Model: AS300-120-
AA250 (Philips);
Input: 100-240 V ~,
50/60Hz, 1.1A;
Output: 12 V
2.5 A
15 W
<0.5 W
5 V
2.1 A
285 x 136 x 143 mm
1.2 kg
2.0 kg
6 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•
Ensure that the AC power adaptor of the
unit is connected properly.
•
Ensure that there is power at the AC
outlet.
No sound or poor sound
•
Adjust the volume of your docking speaker.
•
Adjust the volume of your iPod/iPhone/
iPad, Bluetooth devices or other external
devices.
No response from the unit
•
Disconnect and reconnect the AC power
adaptor, then turn on the unit again.
Cannot sync with PC
•
Switch the docking speaker to standby
mode.
•
Try another USB cable.
•
Install iTunes in PC properly.
Advertisement
Table of Contents
