Listen To Dab Radio Stations; Use For The First Time; Tune To A Stored Station; Program Radio Stations - Philips DCB3270 User Manual

8 Listen to DAB
radio stations
Note
•
For optimal reception, fully extend the antenna and
adjust its position.
•
You can program a maximum of 20 DAB radio stations.
•
Check with local retailer or go to www.WorldDAB.org
for applicable DAB radio frequencies in your area.

Use for the first time

1
Press DAB or SOURCE to switch the
source to .
2
Press /
menu is displayed.
3
Press OK to activate the automatic search.
» This product automatically stores radio
stations with sufficient signal strength.
» After the search is complete, the
first stored radio station is broadcast
automatically.
4
Press /
then press OK to start listening.
• To re-scan for DAB stations, press and
hold SCAN/CLOCK for 2 seconds when
listening to a DAB station.
Tip
•
You can re-scan to update the list of stored stations
(see "Use DAB menus" > "Re-scan for stations").
•
You can tune to a station manually (see "Use DAB
menus" > "Tune to a station manually").
until the
to select a station, and

Tune to a stored station

1
Switch the source to
» The last listened station is broadcast.
2
/
Press
then press OK to start listening.
Note
•
If ? is displayed before the name of current station, the
station is unavailable or inactive.

Program radio stations

1
Tune to a DAB radio station.
2
Press PROG to activate the programming.
3
Press / to select a preset sequence
number.
4
Press PROG to confirm.
» The radio station is stored with the
selected sequence number.
5
Repeat steps 1-4 to program more radio
stations.
• To tune to a preset radio station, press
until its name is displayed.
Note
•
If you store a radio station with the sequence number
of another one, the earlier one is overwritten.
.
to select a station, and
EN
/
15