Specifications; Safety Instructions - Topcom Twintalker 1000 User Manual

ENGLISH
Plug the 12 V DC / 100 mA ADAPTER (not included) into the CHARGER JACK on the
bottom of the unit.
NOTE: The unit cannot transmit calls while the batteries are being charged.
It takes approximately 8 to 10 hours to fully charge the batteries.

6 SPECIFICATIONS

Operating frequency
Channels
Output Power (TX)
Range
Ambient conditions
Temperature
Humidity

7 SAFETY INSTRUCTIONS

7.1 DAMAGE ANTENNA.
Do not use any communicator that has a damaged Antenna. If a damaged antenna
comes in contact with the skin, a minor burn may result.
7.2 BATTERIES.
As batteries can cause property damage and/or bodily injury such as burns if conductive
material such as jewelry, keys or beaded chains touches exposed terminals. The
material may complete an electrical circuit (short circuit) and become quite hot. Exercise
care in handling any charged battery, particularly when placing it inside a pocket, purse
or other container with metal objects.Do not replace or charge batteries in a potentially
explosive atmosphere. Contact sparking may occur while installing or removing batteries
and cause an explosion.
6
466.00625MHz - 466.9375MHz
8 Channels
Output Power :0.5W (Maximum)
Up to 3 Km (open field)
-20˚C -> 60˚C
40% -> 70%
Topcom Twintalker 1000