BT RESPONSE 15 + User Manual page 12

You can record your own
outgoing message to replace
the pre-recorded message. If
you record your own message,
the pre-recorded message will
be automatically removed and
stored in the memory, in case
you wish to reinstate it.
Your outgoing message may sound
something like this: 'Hello, I'm sorry
I can't take your call at present. If you
would like to leave a message, please
speak after the tone.'
To record your outgoing
message speak clearly 15–20cm
from the in-built microphone.
Read all the steps before you
begin recording.
Press and hold the
Your BT Response 15 Plus will
beep and display 'r'.
Keep holding down the
button and speak your message
into the microphone.
When you have finished
speaking, release the
button. Your BT Response 15
Plus will beep, play back your
message, then beep to confirm
the recording. It will then return
to 'answer on' mode.
To re-record your message
repeat this procedure.
10
Response 15+_Issue 2_Edition 1_3.10.03
button.
Press and release the
Your BT Response 15 Plus will
beep and play back your
outgoing message. It will then
beep again and return to 'answer
on' mode.
You can delete your outgoing
message and return to the BT
Response 15 Plus' pre-recorded
outgoing message.
Press and release the
button. Your outgoing message
will be played back to you.
During playback of your
outgoing message press the
button.
Your BT Response 15 Plus will
beep and play its pre-recorded
outgoing message.
Your own message has now
been replaced by the BT
Response 15 Plus' original pre-
recorded outgoing message.
button.