Answer Delay; To Check The Current Answer Delay Setting; To Set The Answer Delay; Vip Feature - BT Response 75+ User Manual

Answer delay

Your Response 75 is set to answer calls after 4 rings, however you can change this
number to between 2-9 rings or time saver.

To check the current answer delay setting

1. Press the button. You BT Response 75+ will announce the current ring
delay setting and show the setting on the display.

To set the answer delay

1. Press and keep holding
followed by further answer delay options. The message counter displays the
selected answer delay setting.
2. When you hear the setting you want, release the
your BT Response 75+ will announce the new answer delay setting and then
return to Answer On mode. The setting will be shown on the display.

VIP feature

The VIP feature sets your answering machine to answer calls silently (do not
disturb) but allows designated VIP callers to alert you with a beep tone that they
are trying to contact you. This feature will only work in Answer On mode.
To allow VIP callers to send an alert you will need to tell them the VIP code.
The pre-set code is 40. When a VIP caller calls you they need to enter the VIP code
when they hear your outgoing message. The VIP alert will last for 30 seconds.
If VIP callers wish to cancel the alert, they need to press
keypad. The unit will give a long beep at the end of the OGM, the caller can then
leave a message after the beep.
. The current answer delay setting is announced
button. After 2 seconds
Time Saver
The time saver option can save you the cost of a
call when accessing your machine remotely, see
page 16 for further details on remote access.
When set to Time Saver your BT Response 75+
will answer after 6 rings if no new messages have
been recorded, or 2 rings if new messages have
been recorded (for more information on remote
access, see page 16).
VIP is pre-set to Off.
on their telephone
Using your answering machine 13