Using other functions
Switching the speaker terminals
If you selected Speaker B at Speaker system
setting on page 101, you can switch between
speakers using the SPEAKERS button. If you
selected Normal(SB/FH), Normal(SB/FW),
Front Bi-Amp or ZONE 2, the button will
simply switch your main speaker terminals on
or off. The options below are for the Speaker B
1
setting only.
•
Use SPEAKERS on the front panel to
select a speaker terminal setting.
As mentioned above, if you have selected
Normal(SB/FH) or Normal(SB/FW), the
button will simply switch your main speaker
terminals (A) on or off.
Press repeatedly to choose a speaker terminal
option:
• SPA – Sound is output from the A-
speaker terminals (up to 7 channels
(including surround back channels),
depending on the source).
• SPB – Sound is output from the two
speakers connected to the B-speaker
terminals. Multichannel sources will not be
heard.
• SPAB – Sound is output from the A-
speaker terminals (up to 5 channels,
depending on the source), the two
speakers connected to the B-speaker
terminal, and the subwoofer. The sound
from B-speaker terminals will be the same
as the sound from the A-speaker terminals
(multichannel sources will be downmixed
to 2 channels).
• SP (off) – No sound is output from the
speakers.
Note
1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 100. However, if SPB
is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except Speaker B connections) are switched off when headphones are connected.
2 If the receiver is in standby, the display is dimmed, and ZONE 2 DVD for example shows in the display.
3 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also
changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast.
Using the MULTI-ZONE controls
The following steps use the front panel
controls to adjust the sub zone volume and
select sources. See MULTI-ZONE remote
controls on page 74.
1
Press MULTI-ZONE ON/OFF on the front
panel.
Each press selects a MULTI-ZONE option:
• ZONE 2 ON – Switches the MULTI-ZONE
feature on
• MULTI ZONE OFF – Switches the MULTI-
ZONE feature off
The MULTI-ZONE indicator lights when the
MULTI-ZONE control has been switched ON.
2
Press MULTI-ZONE CONTROL on the
front panel.
• When the receiver is on,
any operations for the sub zone are done
while ZONE 2 shows in the display. If this
is not showing, the front panel controls
affect the main zone only.
3
Use the INPUT SELECTOR dial to select
the source for the sub zone.
For example, ZONE 2 CD-R sends the source
connected to the CD-R inputs to the sub room
(ZONE 2).
• If you select TUNER, you can use the tuner
controls to select a preset station (see
Saving station presets on page 51 if you're
unsure how to do this).
• VSX-920 model only: iPod/USB and
INTERNET RADIO function cannot be
selected for the MULTI-ZONE feature.
08
2
make sure that
3
73
En