Fujitsu PRIMERGY TX300 S7 System Configurator And Order-Information Manual page 19

I
One or two GPGPU (General Purpose Graphical Processor Unit) can be ordered as option.
The Power Cable kit has to be ordered seperatly and will be installed if ordered ex factory together
with the GPGPU card. New cards requires the suitable Air Duct and bracket kit!
No mix betwenn differnet types of GPGPU or Co-Processor cards allowed
S26361-F3736-E5
Intel Xeon Phi Mounting Kit
1x
consists of 2 power cables, an
PCI card holder + Airduct
max. 1x per system
S26361-F4100-E511
PY Intel Xeon Phi Co-Processor 5110P
Intel Xeon Phi Co-Processor 5110P
8 GB GDDR5 Memory
PCIe Gen2-x16
2x
60 cores and 240 threads
for Co-processing purpose only
power cables from PSU needs to be ordered
800W PSU is recommended
occupied space for two PCI slots
full height bracket
max. 2x per system
J
Intel Xeon Phi Co-processor
This mounting kits contain an airduct that uses 2 bays 1.6" x 5.25".
If these are ordered this 2 bays cannot contain ODD or backup devices.
Note the mountingkit is needed
only one timer per System
The GPGPU cards can be ordered twice
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX300 S7 / RX350 S7
PY Intel Xeon Phi Co-Processors
800W PSU is recommended
Status 2014-01-30
S26361-F3736-L5
Intel Xeon Phi Mounting Kit
consists of 2 power cables, an
PCI card holder + Airduct
for loose delivery
S26361-F4100-L511
for loose delivery
19 of 36