INNOSTREAM INNO-P10 User Manual page 85

If you press [Setup soft key] and move to the icon by pressing [
adjust the following settings by pressing [
Zoom :
You can continuously change the zooming ratio by pressing[
Brightness :
You can change the brightness by pressing [
Resolution :
You can choose resolution. Resolution refers to the number of pixels in a frame.
Higher resolution use more memory per frame.
There are 2 kinds of resolutions : 176x144 / 128x96.
Flash :
You can select flash mode.
There are 2 kinds of flash modes : On / Off. And you can also change flash mode
directly by pressing [
Illuminance :
You can select the illuminance of camera.
There are 3 kinds of illuminance modes : Daylight / Indoor / Night.
By applying illuminance mode, you can get better video quality.
White Balance :
You can select the white balance of camera.
There are 5 kinds of white balance modes : Auto / Daylight / Incandescent / Red
Fluorescent / Blue Fluorescent.
By applying white balance mode according to the current lighting condition, you can
get better video quality.
Color effect :
You can select a color Effect of camera.
There are 6 kinds of color effects : Mono / Sepia / Negative / Engraving / Sketch /
Blackboard.
Recording mode :
You can select recording mode of video clips.
There are 2 kinds of recording modes : Normal / Send.
If you select normal mode, the length of the video recording is restricted by the
available space on your MMC card. And if you
video clips up to 300KB to be conveniently sent via MMS.
] or [
] or [
] key.
9. The Menu Functions
User's Manual
] or [
].
] or [
].
select send mode, you can record
], you can
].
85