INNOSTREAM INNO-P10 User Manual page 82

9. The Menu Functions
Fluorescent / Blue Fluorescent.
By applying white balance mode according to the current lighting condition, you can
get better picture quality.
Color effect :
You can select a color Effect of camera.
There are 6 kinds of color effects : Mono / Sepia / Negative / Engraving / Sketch /
Blackboard.
Shot Number :
You can select single shot or multi shot.
There are 3 kinds of multi shot : 3, 5 and 10.
If you select multi shot, you can take pictures continuously up to 10 images by
pressing [
But there are limitations of multi shot according to resolution and quality.
In 1280x1024 resolution, limit the three shot.
Single Frame :
You can select the frame from preset patterns.
There are 15 kinds of frames.
This menu allows you to compound the picture and the background image.
Note
Resolution is fixed on 128x128.
Multiple Frame :
You can select multiple frame from preset patterns.
There are 5 kinds of multiple frame.
This menu allows you to take several pictures and save them in one frame.
It will be saved as single image consisting of multiple pictures taken.
Note
Resolution is fixed on 128x128.
Self timer :
You can set the timer to delay the shutter.
There are 3 kinds of delay time : Off / 5 seconds / 10 seconds.
When you press the [
Quality:
You can select picture quality.
There are 3 kinds of quality mode : low / medium / high.
82
] one time.
], the camera takes the picture after a specified time.