INNOSTREAM INNO-P10 User Manual page 81

Table of Contents

Advertisement

If there is not enough memory to save a new photo, you need to free some by deleting
old pictures or other files in Photo Album, Image File or File Manager menu.
<Still Shot>
This menu allows you to take pictures and adjust its settings.
Note
Pictures are saved in Photo Album of drive (Phone) when MMC card is not inserted.
You can capture the image on the screen by pressing [
cancel it. The picture is automatically or manually named according to setting of Saving
Name menu. And you can change the zoom by pressing [
brightness [
] or [
If you press [Setup soft key] and move to the icon by pressing [
adjust the following settings by pressing [
Zoom :
You can continuously change the zooming ratio by pressing[
But, in 1280x1024 resolution, zoom feature is not operated.
Brightness :
You can change the brightness by pressing [
Resolution :
You can choose resolution. Resolution refers to the number of pixels in a picture.
Higher resolution use more memory per picture.
There are 4 kinds of resolutions : 1280x1024 / 640x480 / 320x240 / 128x160.
Flash :
You can select flash mode.
There are 3 kinds of flash modes : Auto / On / Off.
And you can also change flash mode directly by pressing [
Illuminance :
You can select the illuminance of camera.
There are 3 kinds of illuminance modes : Daylight / Indoor / Night.
By applying illuminance mode, you can get better picture quality.
White Balance :
You can select the white balance of camera.
There are 5 kinds of white balance modes : Auto / Daylight / Incandescent / Red
].
File Manager menu.
File Manager
] and decide whether to save or
] or [
] or [
].
] or [
].
9. The Menu Functions
User's Manual
] and change the
] or [
], you can
] or [
].
] key.
81

Advertisement

Table of Contents
loading

Table of Contents