Adjusting The Earpiece Volume; Muting The Microphone; Sending Dtmf; Storing A Number On The Scratchpad - INNOSTREAM INNO-P10 User Manual

Table of Contents

5. In-Call Options

You can answer the second incoming call by pressing [Answer soft key] or [

The first active call is automatically put on hold, and then the incoming call is active.

If the incoming call is coming whilst you already have active calls and held calls, the

following options are available by pressing [Option soft key] or [

• End Active Call : makes active calls end and answer the incoming call.

• End Held Call : makes held calls end and answer the incoming call.

You can reject the second incoming call during a call without answering it by pressing

[Reject soft key] or [

5.5

Adjusting the earpiece volume

During a call, you can adjust the earpiece volume.

To increase the volume, press [ ] or [

To decrease the volume, press [ ] or [

5.6

You can mute the microphone during a call by selecting the Mute option so that the other

party cannot hear you. You can unmute by pressing the [Unmute soft key], and then

the other party can hear you again.

5.7

You can turn off the DTMF tone by selecting the DTMF Off option so that the tone is not

transmitted to the remote end during a call.

You can turn on the DTMF tone by selecting the DTMF On option.

The option is automatically reset to the DTMF On when a call is started.

Note

To communicate with answering machine, you must use with the DTMF On state.

5.8

You can store a number you entered during a call.

1. Enter a number during a call.

2. Press [Save soft key] to store it to the Phonebook.

Table of Contents