Technical Specification; Installation; Unpacking; Remove The Transport Supports - Electrolux ERE3000 Instruction Booklet

Technical specification

Model
Volume
Width
Height
Depth
Energy consumption
Energy class
Rated power

Installation

Unpacking

Unpack the cabinet and check that it is in good
condition and free of any transport damage. Notify
the dealer immediately of any damage. Hand the
packaging over for recycling. For more information,
contact your local city office or the dealer.
Do not allow children to play with the
packaging. The plastic film can cause
suffocation.

Remove the transport supports

Remove the tape and the transport supports from
·
the door sides
·
inside the door hinges
·
the shelves
Remove the transport support on the glass shelf by
pushing the support forward along the edge of the
shelf until it stops. Take hold of the rear edge of the
glass shelf and pull the shelf and transport support
forward until the shelf tilts and the transport support
can be removed. Some models are fitted with a
silencing pad under the cabinet. Do not remove this
pad.

Cleaning

Wash the inside of the cabinet using lukewarm
water, a mild washing-up detergent and a soft cloth.

Electrical connection

Connect the cabinet to a grounded electrical outlet.
Voltage: 230 V.
Fuse: 10 A.
Refer to the rating plate on the left inside the
cabinet.
ERE3000 ERE3500/ERE3500X
305 l 354 l
595 mm 595 mm
1600 mm 1800 mm
600 mm 600 mm
168 kWh/y 175 kWh/y
A A
85 W 85 W
11
GB
GB
Electrolux 818 18 49-01/2