Table of Contents
Advertisement
20
Using the Oven
Heat+Hold
The Heat+Hold function keeps your prepared dish warm for 30 minutes, after the baking
or roasting process is completed.
This is helpful, for example, if your guests are late.
Pre-condition for Heat+Hold:
• Set temperature is above 80°C
• Fixed duration
Switching on Heat+Hold
1. Select oven function, meat programme or automatic programme.
2. If necessary, set duration or core temperature.
3. Press the SELECTION
4. Confirm with
The Heat+Hold function is now switched on.
5. As soon as the function is completed, a signal sounds and Heat+Hold starts.
The function set runs at 80°C for 30 minutes.
After 30 minutes with Heat+Hold are over, the oven switches itself off.
Irrespective of the function set, Heat+Hold remains active. You can change between the
3
oven functions.
Heat+Hold can be activated or deactivated in the SETTINGS MENU menu.
3
Inserting the Combination Shelf, Baking Tray and Roasting Pan
Shelf runner safety and anti-tip device
3
As a shelf runner safety device, all insertable components have a small curved indenta-
tion at the bottom on the right and left-hand edge.
Always insert insertable components so that this indentation is at the back of the oven
interior. This indentation is also important for preventing the insertable components
from tipping.
Inserting the baking tray or roasting pan
Push the baking tray or roasting pan between
the guide bars of the selected oven level.
button repeatedly until HEAT+HOLD flashes.
.
Advertisement
Table of Contents
