Clarion NX509E Owner's Manual & Installation Instructions page 65

Installing the Main Unit in a TOYOTA Vehicle
Install by using parts attached to the vehicle. (Screws marked ★ are attached to the vehicle.)
Center Panel *2
Note:
*2 Some panel openings are too small for the unit
depending on the vehicle type and model. In
such a case, trim the upper and lower sides of the
panel frame by about 0.5 to 1.5 mm so the unit
can be inserted smoothly.
Example 1
Vehicles other than NISSAN and TOYOTA
In some cases the center panel may require modification. (Trimming, filing, etc.)
Main Unit
*3
Figure 7
*3 If a hook on the installation bracket interferes
Typical Mounting Brackets
Example 2
Affix the screws to the ● marks.
8-Hexagonal screw
(M5 × 8)
Mounting bracket
(1 pair for the left and right
sides)
with the unit, bend and flatten it with a nipper or
similar tool.
Example 3
63