Source Operations; Radio Operations - Clarion NX509E Owner's Manual & Installation Instructions

5. SOURCE
OPERATIONS

Radio Operations

Listening to the radio
1. Press the [SRC] button, and touch the [Tuner]
key.
The Tuner mode screen is displayed, and the
system resumes the last status of the Tuner
mode.
2. Touch the [Home Travel] key to select the
Home or Travel mode.
The Home/Travel modes are provided to
manage the preset stations separately in your
home location and in a location during a trip.
3. Touch the [Band] key to select the radio band.
Each time the key is touched, the radio
reception band changes in the following
order:
• In Home mode: FM Home 1 ➜ FM Home 2
➜ AM Home (MW/LW) ➜ FM Home 1...
• In Travel mode: FM Travel ➜ AM Travel
(MW/LW) ➜ FM Travel...
4. Touch the desired Preset key to tune in the
corresponding preset station.
22
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
The DX SEEK can tune in to receivable
broadcast stations, and the LOCAL SEEK can
tune in to only broadcast stations with a good
reception condition.
1. Touch the [Band] key to select the desired
band (FM or AM (MW, LW)).
2. Tune in to a station.
• If "TA" is displayed on the screen, TP
stations are automatically sought.
●DX SEEK
Touch the [{ (Seek)] or [} (Seek)] key to
automatically seek a station.
When the [{ (Seek)] key is touched, the station
is sought in the direction of higher frequencies; if
the [} (Seek)] key is touched, the station is
sought in the direction of lower frequencies.
• When the DX Seek tuning starts, "DX-S"
appears on the screen.
●LOCAL SEEK
If you keep touching the [{ (Seek)] or [} (Seek)]
key more than 1 second, the Local Seek tuning is
carried out.
The broadcast stations with good reception
sensitivity are automatically selected.
• When the Local Seek tuning starts, "LO-S"
appears on the screen.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When it is in the step tuning mode, the frequency
changes one step at a time. In quick tuning mode,
you can quickly tune the desired frequency.
1. Touch the [Band] key to select the desired
band (FM or AM (MW/LW)).
2. Tune into a station.
Quick tuning:
Touch and hold the [{ (M-Seek)] or [} (M-
Seek)] key to tune in a station.
Step tuning:
Touch the [{ (M-Seek)] or [} (M-Seek)] key
to manually tune in a station.