Table of Contents
Advertisement
LAN port LED indications
Activity/Link LED
Status
Off
Orange
Orange (Blinking)
Orange (Blinking
then steady)
4.
Line In port (light blue). This port connects to the tape, CD, DVD player, or other
audio sources.
5.
Line Out port (lime). This port connects to a headphone or a speaker. In the 4.1, 5.1,
and 7.1-channel configurations, the function of this port becomes Front Speaker Out.
6.
Microphone port (pink). This port connects to a microphone.
Refer to the audio configuration table below for the function of the audio ports in 2.1, 4.1,
5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Light Blue (Rear panel)
Lime (Rear panel)
Pink (Rear panel)
Lime (Front panel)
To configure a 7.1-channel audio output:
7.
USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are for USB 2.0/1.1
devices.
DVI-D port. This port is for any DVI-D compatible device. DVI-D can't be converted to
8.
output RGB Signal to CRT and isn't compatible with DVI-I.
9.
PS/2 Keyboard port (purple). This port is for a PS/2 keyboard.
1-14
Description
No link
Linked
Data activity
Ready to wake up
from S5 mode
Headset 2.1-
channel
Line In
Rear Speaker Out Rear Speaker Out
Line Out
Front Speaker Out Front Speaker Out Front Speaker Out
Mic In
—
Use a chassis with HD audio module in the front panel to support a 7.1-channel audio
output.
Speed LED
Status
Description
OFF
10Mbps connection
ORANGE
100Mbps connection
GREEN
1Gbps connection
4.1-channel
5.1-channel
Mic In
Bass/Center
—
Chapter 1: Product introduction
ACT/LINK
LED
LAN port
7.1-channel
Rear Speaker Out
Bass/Center
—
Side Speaker Out
SPEED
LED
Hide quick links:
Advertisement
Table of Contents
