Table of Contents
Advertisement
2.5
System memory
2.5.1 Overview
The motherboard comes with four Double Data Rate (DDR) Dual Inline
Memory Module (DIMM) sockets. These sockets support up to 4GB
system memory using 184-pin unbuffered non-ECC PC3200/2700/PC2100
DDR DIMMs and allow up to 6.4 GB/s data transfer rate.
The following figure illustrates the location of the DDR DIMM sockets.
®
P4P800 Deluxe
P4P800 184-Pin DDR DIMM Sockets
Notes on DDR technology
The DDR SDRAM technology evolved from the mainstream PC66, PC100,
PC133 memory known as Single Data Rate (SDR) SDRAM. DDR memory
however, has the ability to perform two data operations in one clock cycle,
thus providing twice the throughput of SDR memory.
A DDR DIMM has the same physical dimensions as an SDR DIMM, but it
has a 184-pin footprint compared to the 168-pin of the SDR DIMM. Also, a
DDR DIMM is single notched while an SDR DIMM is double notched.
Therefore, a DDR DIMM is not backward compatible with SDR, and should
be installed only in a socket specially designed for DDR DIMMs.
2-10
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
