Mounting; Rack Mounting - SMC Networks TigerStack II 10/100 User Manual

I S
NSTALLING THE

Mounting

A TigerStack II 10/100 unit can be mounted in a standard 19-inch
equipment rack or on a desktop or shelf. Mounting instructions for
each type of site follow.
Before mounting the devices, be sure to install any optional
modules, as follows.
Installing Optional Hub Modules: If you have purchased
Network Management Modules and/or slide-in 100BASE-FX or -TX
Extender Modules, install the modules now, as needed, following
the instructions included with each package.

Rack Mounting

Before rack mounting the TigerStack II 10/100 devices, pay
particular attention to the following factors:
Temperature: Since the temperature within a rack assembly
K
may be higher than the ambient room temperature, check that
the rack-environment temperature is within the specified
operating temperature range.
Mechanical Loading: Do not place any equipment on top of
K
a rack-mounted unit.
Circuit Overloading: Be sure that the supply circuit to the
K
rack assembly is not overloaded.
Grounding: Rack-mounted equipment should be properly
K
grounded. Particular attention should be given to supply
connections other than direct connections to the mains.
3-4
TACK