Dell INSPIRON 530 DCMF Owner's Manual page 132

9 Replace the computer cover (see "Replacing the Computer Cover" on
page 160).
10 Connect your computer and devices to electrical outlets, and then turn
them on.
11 Check the system setup for the appropriate diskette Drive Option changes
(see "Entering System Setup" on page 168).
Installing a Floppy Drive
1 Follow the procedures in "Before You Begin" on page 99.
2 Remove the computer cover (see "Removing the Computer Cover" on
page 101).
3 Remove the bezel (see "Removing the Bezel" on page 121).
4 If you are installing a new floppy drive rather than replacing a drive, align
the tip of a Phillips screwdriver with the slot on the break-away metal plate
and rotate the screwdriver outwards to break the metal plate.
5 Gently slide the floppy drive into place in the FlexBay slot.
6 Align the screw holes in the floppy drive with the screw holes in the FlexBay.
7 Tighten the two screws to secure the floppy drive.
8 Attach the power and data cables to the floppy drive.
132
Removing and Installing Parts