JVC GY-DV5100 Instructions Manual page 80

11. MENU SCREENS
11-9 AUDIO Menu Screen (Cont'd)
Item
AUDIO REF. Sets the reference audio level of the tape (both CH-1 and CH-2).
LEVEL –20dB : Records with –20 dB as the reference audio level.
–12dB : Records with –12 dB as the reference audio level. Use this setting
* Use the same setting for playback as for recording.
* This setting is unrelated to the audio level of the DV signal.
(GY-DV5101 only)
AUDIO Used to select which channels to reproduce when playing back a tape
SELECT with sound recorded on 4 channels. (Can only be set in the VTR mode.)
CH1/2 : To reproduce the sound recorded on CH-1 and CH-2.
MIX : To simultaneously reproduce the sound of all four channels.
CH3/4 : To reproduce the sound of the CH-3 and CH-4 channels.
MEMO:
The GY-DV5100 does not allow after-recording on the CH-3 and CH-
4 channels.
AUDIO Selects whether stereo sound or mixed sound is output from the PHONES
MONITOR jack when the MONITOR SELECT switch is set to MIX.
STEREO : Stereo sound (CH-1 audio is output from L, CH-2 audio is
* Only audio of CH-1 is output from the monitoring loudspeaker.
MIX
The TOP MENU screen returns when the SHUTTER dial is pressed while
PAGE BACK
the cursor is at this position.
E-80
Function
when playing back the tape using DV equipment for general
consumer use.
The GY-DV5100 records audio on the CH-1 and CH-2 channels
during shooting.
output from R)
: Mixed sound (The mixed CH-1 and CH-2 audio is output
from L and R)
Variation Range Initial Setting
–20dB –20dB
–12dB
CH1/2 CH1/2
MIX
CH3/4
STEREO MIX
MIX
––––– –––––