2-2.
Removal of Circuit Boards and Other Electrical Components
NOTES
• When removing a circuit board or other electrical component, refer to the precautions for
handling PWBs and follow the corresponding removal procedures.
• The removal procedures given in the following paragraphs omit the removal of the com-
ponent in question from a connector or a PWB support.
• Where it is absolutely necessary to touch the ICs and other electrical components on the
board, be sure to ground your body.
(1)
PagePro 1380 MF
[5]
[4]
[7]
[6]
D-7
[1]
[2]
[3]
4558F2C502DA