I Biis Indication; Biis Operation; I Priority A Channel Selection - Icom IC-F70DS Instruction Manual

I BIIS indication

The following indications are available for the BIIS operation
on a BIIS channel.
CONNECT : Individual/group call is successful.
OK
: Message (status or SDM) transmission is suc-
cessful.
FAILED : No answer back is received.
WAIT : Appears during retry of the call (2nd call).
CLR DOWN : End the communication.
BUSY
: Operating channel is in the busy condition.

I Priority A channel selection

When one of the following operations is performed, the trans-
ceiver selects the Priority A channel automatically.
Priority A is selected when;
• Clear down signal is received/transmitted
- Set the 'Move to PrioA CH' item as 'Clear down.'
• Turning the power ON
The Priority A channel is selected each time the transceiv-
er power is turned ON.
• Status call
The Priority A channel is selected when transmitting a sta-
tus call.
- Enable the 'Send Status on PrioA CH' item in the BIIS
configuration.
4

BIIS OPERATION

4
29