D Tx Code Number Edit - Icom IC-400PRO Instruction Manual

e Push [MONI] (Call) to set the TX code channel, and return
to Function mode.
Push [MONI]
r Push [MONI] (Call) to transmit the code on the selected
channel.
Push [MONI]
✔ CONVENIENT!
• The TX code channel name can be assigned to the all 32
TX code channel via the optional CS-400PRO
. The TX code channel name allows you to easy
SOFTWARE
to select the channel, find the channel user, and so on.
• The long tone function is useful and provides you to proper
individual or group call even through a repeater, or when the
calling station is in scanning operation. The long tone func-
tion can be activated in Set mode. (p. 30)
Appears while transmitting
CLONING
SELCALL OPERATION

D TX code number edit

The [MONI] (Call) key (in Function mode) enables you to
change the TX code contents within the allowable digits.
The group call function works by allowing you to edit a special
'group code' into the last 2 digits position of the SelCall ID
code.
To edit a TX code:
q While in Function mode, push [MONI] (Call) for 1 sec. to
enter the TX code channel selection mode.
• Push [ O ] (Bank/Func) for 1 sec. to enter the transceiver into
Function mode.
• Push [ ]/[ ] to select the desired TX code channel, if desired.
w Push [MONI] (Call) for 1 sec. again to enter the TX code
edit mode.
Push [MONI] for 1 sec.
e Push [MONI] (Call) to select the desired digit to be edited.
• Editable digit blinks
Push [MONI]
6
The first digit starts blinking
6
18